RADIO RIG ICOM IC-2300H VHF ( NEW TYPE)

Radio Rig ICOM IC-2300 VHF Stable 65W of output power The IC-2300H can generate 65W of output power. The rugged aluminum diecast provides effective heat dissipation and keeps RF output even during high duty cycle continuous transmission. A total of 207 memory channels The IC-2300H has a total of 207 memory channels, including 200 regular channels, 6 scan edges and 1 call channel. The channel name is programmable with 6 characters for easy recognition. Built-in CTCSS and DTCS encoder/ decoder The CTCSS and DTCS tones are built-in for quiet stand-by and repeater access. The tone scan function detects the subaudible tone that is used for repeater access. The pocket beep function gives you an audible and visual indicator of an incoming call. The DTCS encoder function ( DTCS transmit only) is also available. Simple operation The IC-2300H retains the basic panel layout and its user interface from the IC-2200H. A 70.6× 20 mm LCD display offers a good viewing angle suitable for mobile operation. The bottom of the display indicates the available functions of the front panel buttons directly below the display. Multiple scan functions The IC-2300H supports various scan types for maximum reception and ease of use. The DMS ( Dynamic Memory Scan) system allows you to scan selected banks from 10 memory banks by simply adding and deleting bank links . Tested to the MIL-STD 810 G specifi cations The IC-2300H is built tough to protect from a rough road. It has been tested to and has passed the latest MIL-STD 810 G specifications including shock, vibration and temperature tests. And more… • Power supply voltage display • Wide/ narrow channel setting • 4.5W ( typical) loud audio • Reduced depth dimensions • DTMF autodial • Time-out timer • Repeater lockout • Automatic power off • S-meter squelch • Selectable LCD backlight color ( amber, yellow and green) • Weather channel receive and alert function ( USA version only) • Automatic repeater function ( USA version only) • Selectable squelch delay from short and long • Squelch attenuator reduces suppression from strong signals • PC to transceiver and transceiver to transceiver cloning capability ( optional cloning software, CS-2300H and/ or cloning cable required) Specification : GENERAL Frequency coverage * Guaranteed range TX: 144– 148MHz, RX: 136– 174MHz* TX/ RX: 144– 148MHz Number of channels 207 channels ( including 6 scan edges, and 1 call) Type of emission F2D, F3E ( FM) Frequency stability ± 3ppm Power supply requirement 13.8V DC ± 15% Current drain ( approx.) Tx 65W Rx Max. audio/ Stand-by 11A 1.5A/ 0.4A Antenna impedance 50© ( SO-239) Operating temperature range – 10° C to + 60° C; 14° F to + 140° F Dimensions ( W× H× D; Projections not included) 140× 40× 162 mm; 5.51× 1.57× 6.38 in Weight ( approx.) 1.1 kg; 2.43lb TRANSMITTER Output power ( at 13.8V DC) 65W, 25W, 10W, 5W Max. frequency deviation ± 5.0kHz/ ± 2.5kHz ( W/ N) Spurious emissions Less than – 60dBc Microphone impedance 600© ( 8-pin modular) RECEIVER Intermediate frequencies 46.35MHz/ 450kHz Sensitivity ( at 12dB SINAD) Less than 0.18¼ V Selectivity Wide Narrow More than 6kHz ( at 6dB) Less than 14kHz ( at 60dB) More than 3kHz ( at 6dB) Less than 9kHz ( at 55dB) Spurious response rejection More than 60dB Audio output power 4.5W typ. ( 10% dist. 4© load) External speaker connector 2-conductor 3.5 ( d) mm ( 1D8º ) / 4©